The next milestone was to complete one of the bed supports. This is made of two MDF boards which are connected via a piano hinge so that it can be folded. The total length of this first bed is 1.85 m, the width is 0.60 m. I had to cut out some parts on the side where the board touches the vehicle wall. Also, towards the end, the vehicle is tapered somewhat, so the board also becomes more narrow. This would be just a kind of "emergency" bed, due to the quite small size. But it fits in the back with even the passenger seat in its regular position.
In the back there is one foldable support leg, which supports the weight of the person on the bed. When folded, the bed support is just 95 cm long and can be stacked away either vertically behind the driver seat or horizontally onto the folded rear right seat bench.